Aluminum bricks masonry in blast furnaces of furnace body, furnace body is in the first half of the blast furnace, its diameter from top to bottom gradually expand, to adapt to the heating expansion in the charge and the friction reducing furnace wall of furnace charge, furnace body accounted for 50% 60% of effective height of blast furnace.In this environment, shaft lining need to meet such requirements, and the characteristics of high alumina brick is high refractoriness, high refractoriness under load, acid resistance, alkali resistance, slag corrosion resistance is strong, good abrasion resistance and other characteristics to meet, so the blast furnace body with high alumina brick lining as very suitable.

Above is the introduction of high-alumina bricks used in blast furnace. The lining environment of blast furnace is complex, and there are many kinds of refractory materials used.Revell production of high alumina brick can satisfy the user a variety of kiln using, for customers to provide revell is not only the refractory material, more is to provide users with reasonable solutions, optimization of the kiln lining.

Product introduction

1. Product definition:

High alumina firebrick is a kind of alumina silicate refractory whose content of alumina is not less than 55%.By alumina content of bauxite or other alumina

High raw materials are formed by moulding and calcining.

 2. Product features:

Thermal stability, high refractoriness in above 1790 ℃, high refractoriness under load can reach above 1480 °, good slag resistance, good thermal shock stability,

Acid and alkali resistance, high temperature creep rate low, high temperature strength characteristics, belong to the high refractory.

 3. Product classification:

High-alumina bricks are generally divided into four grades according to different content of alumina

 4. Product use:

The first-grade high-alumina firebrick is mainly used for electric furnace cover (top), blast furnace (body), hot air furnace partition wall, steel ladle lining and steel barrel.

The inner lining of various thermal kilns, such as iron water truck, cement kiln, glass kiln, etc.Widely used in ironmaking, steelmaking, chemical industry, cement and other industries.

Physical and chemical index

Note :
    Size Tolerance : + / - 1.5 % or + / - 2 Mm Which Ever is Greater
    Above Specified Values Relate to Machine Pressed Standard Bricks.
    P L C Values are for Specimens Heated At Given Temp. for 2 Hours